Hi-Link Wifi Module & Power Module

HLK-PM01 Power Module

Posted On July 12, 2019 at 6:49 am by / Comments Off on HLK-PM01 Power Module

PhaseSingle Phase
Current (Ampere)0.6A
Enclosure TypeMoulded
Frequency (Hertz)50Hz
Input SignalSingle phase AC supply
Input Voltage (Volt)100 to 240V AC
Maximum Load (Ampere)0.6A
Model NumberHLK-PM01
Input Voltage100 to 230V AC
Current0.6 Amp

This is a rather small module that can supply 5V/0.6A from either 120VAC or 230VAC, this makes it perfect for small projects that needs a 5 volt supply from mains.


  • Meet UL, CE requirements,
  • All voltage input (AC: 90 ~ 264V)
  • Low ripple and low noise
  • Output overload and short circuit protection
  • High efficiency, high power density
  • The product is designed to meet the requirements of EMC and Safety Test
  • Low power consumption, environmental protection, no-load loss <0.1W
  • Operation Temperature: -20—+60°C
  • Store Temperature: -40—+80°C
  • Relative humidity: 5—95%
  • Rated input voltage:100-240VAc
  • Maximum input current: <0.2A
  • Input current surge: <10A
  • maximum input voltage: 270VAc
  • Input Low Voltage Efficiency: Vin=110VAc, Output full-load: 69%
  • Input High Voltage Efficiency: Vin=220VAc, output full-load: 70%
  • Long-term reliability: MTBF 100000h
  • Load rated output voltage: +5±0.1
  • Short-term maximum output current: 1000mA
  • The maximum output current for a long time: 600mA
  • Output ripple and noise: 50 mVpp Rated input voltage, full load. Using 20MHz of bandwidth, the load side with 10uF and 0.1uF capacitor
  • Shell maximum surface temperature does not exceed 60°C