RFID NFC Module & Card

Mcp2515 Can Bus Module

Posted On June 20, 2019 at 10:44 am by / Comments Off on Mcp2515 Can Bus Module

Resistance120 ohms terminal resistance
Crystal Oscillator8MHZ
Dimension(millimetre)40x28mm

MCP2515 Module adopts CAN controller MCP2515, and TJA1050 high-speed CAN transceiver. Onboard independent key. Microchip MCP2515 independent CAN protocol controller, support CAN V2.0B regulation. The connection between MCP2515 and MCU is through SPI.

  • VCC :5V power input pin
  • GND : power ground pin
  • CS : SPI SLAVE select pin (Active low)
  • SO : SPI master input slave output lead
  • SI : SPI master output slave input lead
  • SCLK: SPI clock pin
  • INT: MCP2515 interrupt pin

Specifications:

  • Support CAN 2.0B protocol
  • Use High-speed CAN transceiver TJA1050
  • Dimension: 40×28mm
  • SPI control for expand Multi CAN bus interface
  • 8MHZ crystal oscillator
  • 120Ω terminal resistance
  • Use serial port could view the communication data
  • With independent key, LED indicator, Power indicator
  • With power pin