Water Flow Hall Sensor

Water float level valve Vertical

Posted On June 24, 2019 at 6:22 am by / Comments Off on Water float level valve Vertical

MaterialPVC
BrandSea

Floating Ball ValveAutomatic Float Valve Water Level Control Valve F/ Water Tank Water TowerVertical interior Valve G25 

Description:

This valve is the replacement of the traditionalfloat ballcock, which can be applied to various systems of high water tanks,pools, water towers of the industry and civil construction, etc.

Automatic control, low self-complementary water,water full automatic stop

Four intakes, large volume of water

Beautiful appearance, small size, practical,simple installation

Without electricity, easy to use, long life, lowfailure rate, saving water resources

When the pool or tank water levels fall, thevalve body will sink down and then the forerunner of the control valve will beopened. As the pipe water pressure affects, the seal face of control valve willbe opened. Finally the water comes out and vice versa

Note:

This production belongs to the liquid levelcontrol valves. When installed, the float must be vertical. if you need toinstall from the top , a Elbow needed to connect the float valve and the inletline. Firstly, the feed line should be fixed in horizontal plane and thenconnect the automatic water level control valve on the water inlet according tothe standard. The main water inlet should be lined with the control valves’Normal Diameter. When using, the globe valve should be all open. If two valvesare installed in the same pool, the two valves should be held in the samehorizontal plane. Before installing, please clean the impurities in the pipesin case of blocking.

If the water quality is not good, then thevalves need to be maintained properly.

If the users find the time of adding waterbecomes longer, he can just upload the water inlet and make it washed

Specifications:

Type: Upright Inner Installation

Material: Nylon PA66+Food grade rubber

Working pressure range: 0.2-10kg

Applicable Medium: clean water

Applicable Medium temperature: ≤70°

Resistance to high temperature mediumtemperature: 70°~120° 

Outlet Diameter: G1/2

Size: 100.2x58x50mm

Quantity: 1 Pc