Water Flow Hall Sensor

Water flow sensor SEN-HZ41WC

Posted On June 24, 2019 at 6:27 am by / Comments Off on Water flow sensor SEN-HZ41WC

Product Specification

Operating VoltageDC 4.5V/18V
Flow Range0.3-3L/min
Minimum Order Quantity10 Piece

Technical Parameter

1.Water quality requirement: Drinking water health standards, 0~80¿¿¿

2.Flow range: 0.35-3L/min

3.Withstand hydraulic pressure: ≤1.75 MPa

4.Voltage/electric current: DC4.5~18V, ≤15mA, can be customized 24V

5.Insulation resistance: >100MΩ

6.Electrical strength: AC500V, 50HZ

7.Output level: Rated voltage DC5V, high level ≥4.5V, low level ≤0.5V

8.Pulse duty cycle: 50%Product Description

Products Description:

SEN-HZ41WC flow sensor,G1/4 extenal tooth, one type,size:62*15*17mm, intenal tooth into the water ,extenal tooth out  the water ,Waterproof explosion-proof, heat and cold resistance.can be used as a water switch, but also can be used to measure flow, accurate measurement, water flow sensor special use electric water faucet,shower room credit card system, water control machine meter water,water heater,wall hung dedicated.we have two series.If you want to increase the temperature control ,you can add heat sensitive resistor, the output line is green, but also can be connected to the other two special line to control temperature.


Gas water heaters, electric water heater, washing machine, water machine, boiler, electromagnetic water heater, water control (integrated) machine, water machine, heat pump hot water engineering, the card management system of intelligent water meter, water meter, IC campus card sale water system, self sale (sell) water machine, water treatment water distribution equipment, dispensing equipment, cooling system, circulation system, intelligent heating equipment, mechanical equipment, instrumentation, pharmaceutical (agents) equipment etc