Hi-Link Wifi Module & Power Module

Wireless Router Module HLK-RM02

Posted On July 12, 2019 at 7:12 am by / Comments Off on Wireless Router Module HLK-RM02


  • Product:Wireless router PCBA
  • Net standard:wireless:IEEE 802.11n,IEEE 802.11g,IEEE 802.11b wired:IEEE 802.3,IEEE 802.3u
  • Wireless transmission rate:11n: up to 150Mbps 11g:up to 54Mbps 11b:up to11Mbps
  • tracks number:1-14
  • frequency range:2.4-2.4835G
  • transmitting power:12-15DBM
  • interface:One 10/100Mbps LAN/WAN reset interface
  • Antenna
  • Type:Onboard antenn
  • Operating temperature:0-40 Centigrade
  • Operating humidity:10%-90%RH(no condensing)
  • Storage temperature:-40-70 Centigrade
  • Storage humidity:5%-90%RH(no condensing)
  • Additional properties
  • Band bandwidth selectable:20MHz,40MHz,automatic


  • Support 5 types of work mode: AP, Client, Repeater, Bridge, Router
  • AP mode-Default work mode. In this mode, the device works as a wireless access point, support for plug-and-play, and no configuration needed.
  • Router mode-In this mode, the device is equivalent to a wireless router, wired interfaces can be used as WAN, wireless used as LAN. Multiple wireless clients can share a broadband line to search the Internet.
  • Repeater mode -Use the radio relay function of the device, achieve the radio signal repeat and amplified, and form a new radio coverage area, ultimately attain the purpose of extending the coverage of the wireless network.
  • Bridge mode-With the Bridging function of equipment, firstly, the module establish a wireless connection with the front-end wireless network itself ,then sending the wireless signal, at the same time, form a new wireless coverage, signal weak and signal blind spot can be solved effectively.
  • Client mode-The AP to work in this mode for the main AP is a wireless client, the equivalent of a wireless network card.